Die Dimensions for Series 8
Dimensional data and information to assist Die Designers and Toolmakers to incorporate HotFlo! in hot chamber Die Casting dies:
Code | Description | Dimension (mm) |
---|---|---|
Fixed Die | ||
LF | Thickness, Fixed Die | 50.00 or 60.00 or 80.00 |
L52 | Depth, Heater Clearance | 37 or 47 or 67 |
L53 | Depth, Head Location | 5.5 |
D51 | Diameter, Sprue Bush Location | 22.05 +.04 - .00 |
D52 | Diameter, Heater Clearance Hole | 45.0 maximum |
D53 | Diameter, Head Location | 52.10 +.05 - .00 |
R52 | Radius, End of Heater Clearance Hole | 3 |
A52 | Angle, End of Heater Clearance Hole | 30 degrees |
Back Plate & Insulation Plate | ||
LB | Thickness, Back Mounting Plate | 20 |
LP | Thickness, Insulation Plate | 6 |
L62 | Depth, Location Ring Anchor | 3.5 |
D61 | Diameter, Bush Head Clearance | 52.50 +1.0 - .0 |
D62 | Diameter, Location Ring, Location | 80.0 + .1 - .0 |
D63 | Diameter, Location Ring Clearance, Insulation | 82 |
Moving Die (Mono & Duo Tips Only) | ||
L71 | Depth, Sprue Tip Location | 25.00 + .05 - .00 |
D71 | Diameter, Sprue Tip Location | 25.00 + .05 - .00 |
Ejector Pins | ||
Mono - Diameter x quantity, location | 4 mm x 1, 8mm from centre | |
Duo - Diameter x quantity, location | 3 mm x 2, 8mm from centre |